سلسلة VST أبراج التبريد
أبراج التبريد سلسلة VST
النوع المربع والمستطيل
أبراج التبريد من سلسلة VST هي مثالية جدا للأحجام والقدرات من 100 متر مكعب في الثانية إلى حجم وقدرة 1000 متر مكعب في الثانية, يساعد تصميمها الهندسي المتميز بهيكل داخلي مصنوع من معدن الاسنانلس ستيل * ( أو الحديد المجلفن )إختياري * فهي من حيث الشكل الخارجي ذات زوايا وأبعاد تأتي إما مستطيلة الشكل أو مربعة الشكل (حسب الحجم والقدرة المختارة من قبل العميل)* تصنع من قبل شركة فولجا لتقنيات التبريد VOLGA COOLING TECHNOLOGIES الشركة الأمريكية الرائدة عالميا في مجال أبراج التبريد وتصنع من خليط مبتكر مقاوم من مادة الألياف الزجاجية عالية الجودة ونحن نستخدم أفضل وأجود المواد لبناء الجسم سواء كان دائري الشكل أو ذو زوايا حسب متطلبات التصميم وحسب طلب العميل .
نحن نضمن جودة منتجاتنا من هذا النوع كما نظمن أن يكون التصنيع أو التوريد حسب المواصفات الأمريكية وحسب توصيات المعهد الأمريكي لتكنولوجيا التبريد CTI ونحن في فرع فولجا السعودية لأبراج التبريد نعتز بحصولنا على عضوية المعهد الأمريكي لتكنولوجيا التبريد وعدد كبير من الشهادات التي تبرز مكانتنا وتميزنا في هذا المجال عبر وكيل الشركة الحصري في السعودية ومنطقة الخليج: مجموعة محمد الشهري للصناعة والتجارة والمقاولات.
ولمزيد من التفاصيل التقنية والهندسية عن هذا المنتج :
VST Series - Square TypeFeatures♦ High efficiency, save energy to the largest extent♦ Fit with various environment changes in different indutries ♦ Matched equipment running normaly ♦ Completely comply with national standards |
Components Instruction
CASING AND WATER BASIN
VOLGA COOLING TOWER - VST Series - Square Type Fiberglass reinforced polyester (FRP) is applied with water-resistance resin and high quality fiberglass mat. With good moisture, high gel,high strength, spray the gel-coat on FRP parts by machine and is thermal formed.
FAN & DRIVING SYSTEM
In Products All Our cooling tower fans with adjustable pitch blades are applied to being balanced, it operates stably and quietly. Material chosen are A.B.S, aluminum alloy for normal standard, F.R.P or stainless steel material available for option.Small capacity cooling tower adopts direct drive low noise fan. Bigger capacity fan equipped with Belt drive speed reducer or Gear box.
WATER DISTRIBUTION
We Using high coefficient rotating sprinkler head made of plastic or aluminum alloy could reduce the pressure of friction loss, and the water can be distributed evenly to achieve the max thermal cooling performance.FILLS
We Using a high quality & improved performance PVC Fills From 45 C To 90 C Temprutuer/ And Also We Provide Another Two Option For The Fills ( ABS) and PP, polypropylene with good material, it is high cooling efficiency and anti-corrosive & UL V-0. The surface of infill is corrugated to increase the filling pitch to make sure that infill is clog-free and overcome the problem of water quality. Special material for option if high entering water temperature.FRAME
The framework Are made From Two Metals Type As OPTION: 1- hot dip galvanized steel (HDGS), 2- Stainless Steelto makes the cooling tower in rust-free, durable and long service life.
Optional Accessories
♦ Noise reduction upgrade ♦ Anti-Freeze heater♦ Vibration isolator & rubber mat ♦ Stainless steel framework / bolts and nuts (304 / 316)
♦ High-temperature upgrade ♦ Dual-speed Motor & VFD motorAnti-Freeze heater